Articles for January 2020

A Quick Guide For Lab Panel Tops Selection

Panel tops are necessary for efficient results in laboratory procedures. As you read through this article, you will surely know the required steps in selecting one.

Lab Panel Top Material

The lab panel top, workbench, or countertop is where the usual task takes place. There is a vast sea of choices in panel top comparisons. Most laboratory practitioners consider five common materials. Included in the list are:

ESD or Electro Static Dissipative Laminate 

this is a specialized conductive material for diffusing static friction or electricity. It is made to protect your work area from electronics that produce static-sensitivity and charges. It is recommended for industries related to semiconductor manufacturing and production.

Resistant Laminate

this has durability and impact resistance. It is a choice material in different industries.

Phenolic Resin

this has lightweight features. It has durability and resistant properties that repel fungus and bacteria. It resists chemicals and commonly used for laboratories that process heat exposure continuously.

Stainless Steel

this is one of the most manageable surfaces. The maintenance and aesthetic design make it suitable for most lab works. This material resists rust, heat, and corrosion. It is also used in residential, manufacturing, and industrial operations.

Butcher Surface

this material is low maintenance and affordable in price. This is made with straight wood glued into thick surfaces. It differs with laminate tops in terms of light sanded application and oiling application.

The material you will be using depends on the type of laboratory or industrial process that will be operated. You may visit trespa toplab for premium selection.

Lab Panel Top Size

This is an important aspect to put into consideration – the size of the panel top or countertop. Most of the sizes range from 24” to 36” in width. However, this still depends on the space availability of your laboratory.

Lab Panel Top Mobility Or Stationary Structure

You will have to decide whether you will make your lab panel revolving or stationary. Your laboratory design does not change frequently. So most probably, stationary work panels are recommended.

Lab Panel Top Customization

When you already come up with a panel top material and design, it is now time for customization. You may want to add your business identity features. Accessories can also add distinctiveness to it. The cords or plugs and lights can make it easy for you and your lab workers to operate on it.


Selection is a very crucial step in any process. As you have seen fundamental guides lab tops, you can be aware and active in making your laboratory works successful and purposeful.

5 Tips To Avoid Transmission Breakdown

Once you notice something unusual with your car’s transmission, don’t take it for granted and look for a fix. It’s great that most car trouble can quickly be sorted by your professional transmission rebuild St. Louis, but it’s even better if you didn’t have to experience any issue in the first place. With that, looking after your vehicle’s transmission and preventing any mishap is important. Here are some tips to prevent a possible transmission breakdown.

Check Your Transmission Fluid Level Regularly.

Make it a practice to check your transmission fluid color, level and smell routinely. It is advisable to examine your car every after 1,600 kilometers. Then, see to it to change the fluid every other year or every 80,000 kilometers, whichever comes first.

Use The Appropriate Fluid.

The type of fluid may vary for each vehicle. While you may use your old and reliable one, some newer fluids are designed to boost the performance of your transmission. They may come at a heftier cost but worth the price in the long run.

Prevent Excess Heat In Your Transmission.

Heat can spell disaster to your vehicle’s transmission. Studies show that around 90% of transmission mishap are brought by heat. See to it that your car is operating within the normal temperature, not only you’ll protect your transmission but also improve the lifespan of your car in general.

Avoid Strains In Your Transmission.

Overloading is one bad way to put stress on your car’s transmission. Towing all that weight overwork your transmission causing it to overheat. Moreover, if you need to rock, make sure not to do it between gears. Waiting for the wheels to stop and rocking gently afterwards prevents strain placed on your transmission.

Warm Up Your Car On Cold Mornings.

Make it a habit to warm up your engine and transmission for around 30-60 seconds before driving. After that, drive easy until the vehicle is sufficiently warm.

Those tips are surefire ways to prevent any transmission mishap. However, if things go out of hand, visit a transmission repair in St. Louis immediately to avoid any further damage.


3 Easy Steps On Replacing a Fireplace Damper

As fireplace dampers sit nearly above the fire, extreme heat and fluctuating temperature can distort and damage it, thus, needing a replacement. Cracks caused by rapid heating and cooling may ruin your damper’s function, leading to more disastrous problems. It may not seem so, but you can replace your fireplace damper yourself with these three easy steps.

Damper Cleaning

Most people tend to skip cleaning the damper, causing them to get injured because of falling debris while doing the replacement process. Remove any debris up where the fireplace damper is along with the firebox itself. Any ash remains in the firebox must be cleaned and thrown away. Aside from falling debris, beware of uncooled ashes as you might get burnt while cleaning them. You can place the ashes that you have gathered into a metal can.

Damper Removal

This process is simple to understand but also a bit delicate task for beginners like you. Start the removal procedure by using a wrench to loosen the nuts to remove the metal rod attached inside the chimney. You can now twist the damper off and remove it from the fireplace. However, if the rod and its nuts have severe rusting, you need to replace them. In this case, you might prefer to consult a professional in choosing a new damper or take it with you to compare dimensions for a proper fit.

Damper Reinstallment

If you have bought a new and suited damper, it’s time for you to install it. Slide the damper onto the rod and secure it with the rod’s nuts. Fasten it tightly so that it will not be wiggly, which may fall and cause an accident. Before testing your new damper with fire, make sure that you have followed the manufacturer’s instruction as it may differ according to their intentions. If it still doesn’t work, consult a professional for safety and amendment.

Instead of paying a sum of money over fireplace damper replacement services, follow these simple steps to save more money. However, be cautious as this task is risky and can be disastrous or might compromise your safety.

4 Tips To Keep Your Roofing In Best Condition

Your roofing is made following your need to safeguard your home from various elements. Snow, debris, rainwater, bugs, UV rays, and even small animals are some of the potential threats that your roofing protects you from. Of all the structural parts of your home, roofing is frequently neglected until it such time that you untimely replace or have them repaired. To save on cost, let’s find out the effective ways to uphold the condition of your roofing.

Best Roofing Maintenance Tips

Keeping your roofing on a pristine condition is fairly easy, however, there’s no shortcut in doing this. It’s a straightforward method and it’s worth it because you can keep your roofing for several years. Roof repair long island may also be considered if necessary as part of the maintenance method. 

  • Regularly Clean Your Roofing.

The first thing you can do is a simple cleaning at your roofing. For the best results, you can use a power washer to make sure the thick dirt that may have build-up can be cleared. You also need to look out for algae and moss on your roofing; clean them with water and bleach. 

  • Clear Your Gutters.

One of the most critical parts of your roofing is the gutter; thus, you need to pay special attention to it. Otherwise, ignoring your drain may lead to bigger roofing problems. Gutters should also be cleared of dirt, leaves, and other debris.

  • Repair And Replace Damaged Roofing Parts.

To prevent further damage, make necessary repairs or replace damaged components right away. You may seek the help of a professional Roof repair long island for the repair and replacement of roofing parts.

  • Inspect Your Roofing At Least Once Thrice a Year.

This simple task is necessary if you want your roofing to last longer. You can start with the surface; next is the shingles, gutter, and the flashing. Check also your ceilings for signs of a leak, pest, and wooden termites, and address the problem right away.

Although the tasks we discussed above are all easy to do, you should be extra careful whenever you maintain your roofing.  In cases where repair is imminent, you should consult an expert Roof repair long island. Doing a regular inspection, cleaning, and small repairs are all worth it, especially if you can keep your roofing for a long time.